Barberan 18248, Manual

Page: 25 / 105

2.4.1.4.MAINTENANCE
2.4.1.4.1. Daily tasks.
2.4.1.4.1.1.- Steps to follow by switching on the wrapping machine.
•
Heat up the slot nozzle until it reaches the working temperature.
•
Using a gauge sheet of 0.4 mm thickness, clean the slot (13) shifting the
sheet softly taking care not to damage the gauges nor the slot. If this
happens there is a risk of leak or marks in the application.
•
Perform a scan with the two gauges shifting them between the minimum
of 12,5 and the maximum.
•
Place the gauges in the wished application width.
•
Pump glue until it comes out fluidly.
•
Clean with solvent the head zone that is in contact with the foil until it is
perfectly clean.
NOTA
IN CASE OF NON-STOP PRODUCTION YOU HAVE TO PERFORM THIS
OPERATION AT LEAST ONE TIME PER DAY
13