Barberan 18248, Manual

Page: 22 / 105

7.- With Allen keys, adjust the positioning wheels of the tools all
along the workpiece, in such a way that they are perfectly adjusted
in its outline, as shown on the drawing.
8.- As the tools are adjusted all along the workpiece, do a slow
forward movement for one meter, more or less, with the push button
“Conveyor forward” and stop it with the push button “Conveyor
stop” .
9.- Adjust the positioning wheels to the new position of the
workpiece until the whole length of the machine is adjusted.
10.- Check that the workpiece moves parallel regarding the
longitudinal direction of the wrapping machine, without deviations.
11.- Push the push-button “Controls OFF” .
12.- Place the “Main switch” in “OFF” position.
Warnings
•
The adjustment of the machine while the machine is in operation may
have bad consequences for the operator.
•
The improper performance of the adjustment does not asure the correct
operation of the machine.
•
BARBERAN, S.A. does not guarantee the correct operation of the
machine in case of improper adjustment of the parts.