Barberan 18248, Manual

Page: 35 / 105

3. Maintenance
3.1. Preventive
Machine part Activity Periodicity
Emergency stop and limit
switch for doors and
housings
You must do a visual checking of these components and
verify its operation by performing emergency stops and
proceed to replace them if they have strokes, leaks or in
case of malfunction.
Weekly
Limit switches of the
conveyor and encoder You must do a visual checking of these components,
proceeding to replace if they have strokes or leaks.
Weekly
Checking the status of
pulleys and belts
Visual checking of its status proceeding to replace if they ar
fault.
Monthly
Checking the status of the
rollers and/or conveyor
belt.
You must do a visual checking of its status, verifying if they
have strokes, deformations or an irregular surface. In this
case you should replace the damaged element.
Monthly
Checking the status of the
guiding rollers. You must do a visual checking of its rubber, proceeding to
replace if it has strokes, deformation or an irregular surface
Monthly
MOTOR GEARBOX
Conveyor system
•
See additional manual
•
The conveyor system does
not work.
•
The motor-variator-gerbox is fault.
•
The connection cables to the motor are damaged.
•
Replace
the fault
componen
t of the
motor-
variator-
gearbox
group.
•
Check the
connection
cables.
One motor does not work
Thermal protection is activated.
Repair the termal
protection.
The conveyor does not
work
•
The motor-variator-gearbox is fault.
•
Replace
the fault
componen
t of the
motor-
variator-
gearbox
group.