Barberan 18248, Manual

Page: 19 / 105

1.
Close the popped up screen.
2.
Selector ON / OFF leisters.
3. Impulse number counted by the machine until the leisters stop,
once the leisters have started up and the photoelectric cell does
not have any entry signal of the machine.
BRUSHES
The brush functioning selection is done through a popped up screen.
We will able to place the brush on OFF/ON position with a touch selector.
The start-up of the brush can only be done if the conveyor of the machine is
functioning.
1.
Close the popped up screen.
2.
Connection / disconnection cleaning brush.
PRODUCTION DATA
As production data, the machine has a meter counter and a workpiece counter.
1. Close the popped up screen.
2. It gives the number of work pieces that gets through the line.
3. It gives the number of lineal meters of profile that are produced
with the machine.
4. Reset of workpiece counter.
5. Reset of meter counter.
1 2
1
2
3
4
5