Page 15
Assembly instructions (continued)
STEP 12:
Connect the side burner gas hose to the BBQ
WHAT YOU NEED:
2 x Adjustable Spanners
The side burner gas hose is factory fitted to the side burner gas inlet. Once the side burner
shelf is fully installed, connect the other end of the gas hose to the bbq manifold as shown.
Use two spanners, one to hold the manifold firm, the other to tighten the nut on the gas hose.
A leak test as outlined later in these instructions needs to be performed before using the bbq
or side burner.
STEP 13:
Attach the Left Side Shelf.
WHAT YOU NEED:
1 x Left Side Shelf
1 x M4*10mm Round Head Screw
Hang the side shelf onto the loose M6*50mm screws from Step 10 above and then tighten
the M6 screws firmly.
Fit and tighen the M4*10mm round head screw to connect the side shelf and control panel as
below.
