Page 8
Assembly instructions
STEP 1:
Attach magnet and lower door hinges to the cart base panel.
WHAT YOU NEED:
2 x M3*12mm Flat Head Screws
2 x M3 Nuts
1 x Magnet
2 x Door Hinge
2 x M6 Nuts
Screw the magnet to the cart
base panel with M3*12mm screws
and M3 Nuts. Ensure the magnetic
strips are facing outwards.
Fit the 2 lower hinges to the cart base panel as shown using 2 x M6 nuts.
STEP 2:
Assemble the Cart Left Side Panel.
WHAT YOU NEED:
1 x Left Front leg
1 x Left Rear leg
1 x Cart Side Panel
1 x Cart Side Panel Brace
6 x M4*10mm Round Head Screws
Attach the cart side panel and side panel brace to the left front and rear legs as below.
Tighten by M4*10mm round head screws firmly.
