Page 20
Checking for gas leaks and lighting the bbq (continued)
4. Push down any main burner control knob and keep pressing whilst turning
anti-clockwise to the
“HI”
position (a clicking sound is heard). This will light that main
burner
.
5. If the burner has not lit after retrying once, turn the control knob
“OFF”
(clockwise) wait
5 minutes and repeat step 4.
6. If the burner does not light. Light the appliance with a match using the lighting hole in the
side of the appliance. Consult your store of purchase if necessary to service the ignition.
Warning:
If the burner completely fails to ignite, turn the control knob
“OFF”
(clockwise)
and also turn the cylinder valve
“OFF”.
Wait five minutes before attempting to relight with
ignition sequence.
7. Adjust the heat by turning the knob between the “
HI”
and
“LO”
positions.
8. Light individual main burners in the same way as above.
9. To turn the barbeque “
OFF”
turn the cylinder valve or regulator switch to the “
OFF”
position and then turn the control knob on the appliance clockwise to the
“OFF”
position.
Lighting Instructions (Side burner)
1. Open the lid of the side burner.
2. Push down the side burner control knob and keep pressing whilst turning anti-clockwise
to the
“OFF”
position (a clicking sound is heard), this will light the side burner
.
Observe if
the burner has lit. If the burner is not lit, repeat this process once.
3. If the burner has not lit after retrying once, wait 5 minutes and repeat step 2.
4. If the burner still does not light. Light the appliance with a match using a long match or
taper. Consult your gas dealer to rectify the ignition.
Warning:
If the burner fails to ignite, turn the control knob
“OFF”
(clockwise) and also turn
the cylinder valve
“OFF”.
Wait five minutes before attempting to relight with above ignition
sequence.
5. Adjust the heat by turning the knob between the
“HI”
&
“LO”
positions.
6. To turn the side burner
“OFF”,
turn the control knob clockwise to the
“OFF”
position.
NEVER CLOSE THE SIDE BURNER LID WHILE THE BURNER IS ON OR HOT!
If you wish to turn the complete barbeque
”OFF”
turn the cylinder valve or regulator switch
to the
“OFF”
position and then turn the control knob on the appliance clockwise to the
“OFF”
position.
Before cooking for the first time, operate the barbeque for about 15 minutes with the hood
closed and the gas turned on
“LO”
.This will “heat clean” the internal parts and dissipate
odour from the painted finish.
