Page 12
Assembly instructions (continued)
STEP 8:
Attach the Cross Brace.
WHAT YOU NEED:
4 x M4*10mm Round Head Screws
1 x Cross Brace
Attach the cross brace to the top of the cart as below. Tighten by M4*10mm screws.
The magnet should be oriented as shown below.
STEP 9:
Attach the Doors.
WHAT YOU NEED:
1 x Left Door
1 x Right Door
Start by locating the door lower pin into the hole in the base panel.
Swing the top of the door into position near the cross brace.
Push the door upper hinge pin down then let it spring back into the hole in the cross brace.
