Page 5
Where to put your barbeque (continued)
When used on the ground always place the appliance and cylinder on flat level ground.
NEVER
light the GRILL with the HOOD in the closed position.
NEVER
light the SIDE BURNER with the LID in the closed position.
Storage of Appliance
Storage of an appliance indoors is only permissible if the cylinder is disconnected and
removed from the appliance. When the appliance is not to be used for a period of time it
should be stored in its original packaging and stored in a dry and dust free environment.
This barbeque is designed to use outdoors, away from any flammable materials. It is
important that there are no overhead obstructions . It is important that the ventilation
openings of the appliance are not obstructed. The barbeque must be used on a level,
stable, heat resistant surface. The appliance should be protected from direct draughts and
shall be positioned or protected against direct penetration by any trickling water (e.g. rain).
Parts sealed by the manufacturer must not be altered by the user. No modifications should
be made to any part of this barbeque and repairs and maintenance should only be carried
out by an authorised service technician.
Connection to Appliance
Before connection, ensure that there is no debris caught in the head of the gas cylinder,
regulator, burner and burner ports. Spiders and insects can nest within and clog the
burner/venturi tube at the orifice. A clogged burner can lead to a fire beneath the
appliance.
Clean burner holes if necessary with a heavy-duty pipe cleaner.
Disconnect the regulator from the cylinder when the barbeque is not in use. Do not
disconnect the hose at the barbeque. If the hose is replaced fit the new hose to the
appliance using a spanner to tighten it onto the connection thread. Check for leaks.
