Barbeques Galore BEEFMASTER G2BV, Instructions For Assembly And Use

Page: 41 / 69

Page 41
Converting from LPG to NG
Conversion can only be performed by an authorised person. Installation
can only be performed by a licensed gasfitter. For Range units, follow the
conversion instructions supplied separately with that unit.
NG injectors are supplied loose with original instruction manuals.
WHAT YOU NEED
Suitable governor, hoses and fittings (supplied separately)
Main Burner NG 1.7 mm Injectors (one for each main burner)
Side Burner NG Injector SS 1.61mm, CI 2.04mm (if side burner fitted
)
Rear Burner NG Injector 1.54mm (Only for DLX 4B/6B)
NATURAL GAS label
One Injector socket spanner (not supplied)
One small regular screwdriver (not supplied)
Two Adjustable spanners (not supplied)
Leak and pressure check equipment (not supplied)
1 2
Converting from LPG to NG
NG Injector Rear Burner NG Injector
1. Turn the gas supply OFF and
disconnect from the gas supply.
Remove the cooking grills, hotplates
fame tamers and ceramic tiles and
racks where fitted. Remove the main
burners by releasing the “R” pins from
under the back of each burner, and
lifting each burner upwards and
backwards.
2. Use a socket spanner to remove
each of the LPG (stamped 0.93)
main burner injectors by turning
them anticlockwise. Replace each
injector with an NG (stamped 1.7)
injector, tighten clockwise. DO NOT
overtighten.