Barbeques Galore BEEFMASTER G2BV, Instructions For Assembly And Use

Page: 28 / 69

Page 28
If you are using Natural Gas or connecting to a reticulated supply, refer to details at the start
of this manual under “Checking the gas type and supply”.
If you are using a portable LPG gas cylinder, place the filled LPG cylinder into the right side
of the cabinet, so that it sits inside the round cut out in the base shelf (or if your model has a
slide out cylinder drawer, sit the cylinder into the round cut out in the cylinder drawer). Take
the hose that came with the barbeque, check that it has a rubber seal on the regulator end of
it, and connect this end of the hose to the gas cylinder. You won't need a spanner here. Just
turn the fitting in an anticlockwise direction and hand tighten as much as you can. This
should seal it sufficiently. Ensure the gas cylinder is secure. Conduct a leak test as follows
before use.
Connecting the gas cylinder