barbas 70-55 PF2, Installation And Maintenance Manual

Page: 41 / 84

2. Use the 2 tension bars to attach the mantel iron to the rear wall.
3. Make sure the tension bars are at an angle of 60º towards the appliance.
4. Level the mantel iron with the tension sleeves. Use a level.
5. Make sure the distance between mantel iron and underside of the glass is equal at
all sides.
6. Make sure distance A is minimum 2 mm between the mantel iron and the top of the
side panels. This lets you remove the side panels.
7. Make sure the mantel iron is perpendicular to the side panels.
8. Put a ceramic wool strip on top of the mantel iron, before putting brickwork or plates
on it.
5.2.11 Build the fireplace
Safety conditions
Warning: Do not cover the top side of the appliance with brickwork, plates or
any other material.
Installation
Gas Fire Panorama 70-55 41