Barazza FEEL 1FFYPPI, Technical Specifications, Page: 25 / 208

25
ENGLISH
INCIDENT CAUSE SOLUTION
A flashing symbol E:1
appears on the temperature
display (2) and an alarm
sounds. The oven has
stopped heating up.
The oven door has not been
locked. The door lock has
not worked. Touch any sensor to stop
the alarm. Call the Technical
Assistance Ser vice.
A flashing symbol E:1
appears on the temperature
display (2) and an alarm
sounds. The oven has
stopped heating up.
The door is locked Touch sensors and (11)
at the same time and the
door should unlock. Call the
Technical Assistance
Ser vice.
A flashing symbol E:2
appears on the temperature
display (2) and an alarm
sounds.
You have opened the door
before it has been locked. Touch any sensor to stop
the alarm. You will see the
time left before the oven
can be used again on the
display (4). When the display
shows 0:00, close
the door before
programming the pyrolytic
function again.
A flashing symbol E:3
appears on the temperature
display (2) and an alarm
sounds.
You have opened the door
during the pyrolytic function.
The door lock has not
worked. Call the Technical Assistance
Ser vice - your oven is
operating in potentially
dangerous conditions.
The door should be locked
with the pyrolytic function.
A flashing symbol E:4
appears on the temperature
display (2) and an alarm
sounds.
The door has been locked
without a pyrolytic cleaning
cycle being programmed. Touch any sensor to stop
the alarm. The E4 symbol
will continue to flash
and the time remaining
until the door is unlocked
will be shown on the
display (4). After this time,
you will be able
to open the door.
Touch any sensor to remove
the symbol E4. Call the
Technical Assistance
Ser vice.
3172892-001 20/05/15 12:39 Página 25