Barazza FEEL 1FFYPPI, Technical Specifications, Page: 121 / 208

Caution
If these problems persist despite these tips,
contact Technical Service.
25
6 Once clean, return the glass panels in the
same order so that the word
TERMOGLASS
can be read.
7 Replace the upper clasp of the door, making
sure that the side tabs fit in point 1.
Caution
First make sure the oven is unplugged before
proceeding to change the bulb.
• Unscrew the bulb-holder glass cover.
• Replace the bulb and reassemble the glass
cover.
The replacement bulb must be resistant to tem-
peratures up to 300ºC. You can order one from
the Technical Assistance Service. Figure 16
For other oven models, follow these
instructions:
• Loosen the lens from the lampholder with
the help of the appropriate tool. Fig 17
• Exchange the bulb.
• Replace the lens, making sure it fits in the
correct position without forcing it. Fig 18
Changing the Oven Light bulb
ENGLISH
If Something Goes Wrong
The oven stops working
Check the power connection.
Check the fuses and the circuit breaker
for your installation.
Make sure the timer is either in the manual
or programmed setting.
Check the position of the function
and temperature setting.
The light inside the oven does not go on
Change the bulb.
Check that it has been properly inserted
according to the Instruction Manual.
The heating pilot light does not turn on
Select a temperature.
Select a function.
It should only come on while the oven
is heating up to the temperature selected.
Oven smoking during use
Normal during first use.
Clean the oven regularly.
Reduce the amount of grease or oil in the tray.
Do not use temperatures higher than
those indicated in the cooking chart.
The expected cooking results
are not achieved
Check the cooking chart for guidance
on how your oven operates.
3172539-004 EPIFA 25/06/14 12:30 Página 25