Bante810 Benchtop Dissolved Oxygen Meter
2
Display
The Bante810 dissolved oxygen meter is equipped with an easy-read LCD display that used to show measured values and mode icons. The following table
describes the function of each icon.
INDEX:
Measurement mode icon:
Indicates the meter is in the measurement mode.
Hold icon:
Indicates the measuring value has been locked.
Calibration mode icon:
Indicates the meter is in the calibration mode.
Automatic Temperature Compensation:
Indicates the temperature compensation is enabled.
Setup mode icon:
Indicates the meter is in the setting mode.
Keypad
The meter has a succinct membrane keypad, names and symbols describe the each function key controls.
KEY
FUNCTION
MEAS|
•
Switches the meter ON/OFF.
•
Locks the measured value, press the key again to resume measuring.
•
Exits the calibration or setting and returns to measurement.
MODE
•
Toggles between % saturation and concentration measurement modes.
CAL|
•
Starts calibration.
•
Enters the setup menu (Press and hold the key for 3 seconds).
° C
•
Sets the temperature.
•
Increase the setting value.
•
Decrease the setting value.
ENTER
•
Confirms the calibration, settings or displayed options.
