Bante810 Benchtop Dissolved Oxygen Meter
4
Installing the Electrode Holder
Take out the electrode arm from the packaging. The base plate of the electrode holder has a circular hole, the electrode arm has a connecting rod. Insert the
connecting rod into the circular hole and swivel the electrode arm 90
o
. Electrode holder is now ready to swing into desired position.
Adjustment of electrode arm
After installation, if the electrode arm automatically rises or falls, you need to adjust the screws until arm locate at any position.
1.
Remove the plastic cover from the electrode arm.
2.
Use the screwdriver to tighten the screw moderately.
3.
Insert the plastic cover to previous position. Installation is completed.
Connecting the Dissolved Oxygen Probe
1.
Follow the steps below to place the probe into left or right side of the electrode arm.
1. Insert the probe
2. Hook up the cable
3. Hook up the cable
