Bante810 Benchtop Dissolved Oxygen Meter
5
2.
Insert the 6-pin connector into the connector socket labeled DO. After the connection is completed, DO NOT pull on the cable. Always make sure that
the connector is clean and dry.
Connecting the Power Adapter
1.
Before plugging in the power adapter, ensure that its voltage matches the local main voltage.
2.
Insert the connector to the power socket. The meter is now ready for use.
Switching the Meter On and Off
•
Press the
Meas
key to switch on the meter, the display shows the measured values.
•
Press and hold the
Meas
key for 5 seconds, the meter will switch off.
To enable the Auto-Power Off feature, please refer to chapter SETUP MENU.
Prior to Use
Connect the dissolved oxygen probe to meter. Turn on the meter 10 to 15 minutes and wait for the probe to polarize.
