Banner Sure Cross DXM150 Series Instruction Manual Download Page 8

Page: 8 / 107

•

Universal Inputs

•

Discrete outputs

•

Courtesy power

•

Battery backup

•

Solar controller

Connectivity

—The DXM's wired and wireless connectivity options make it easy to share data between local and remote

equipment. The cellular modem option eliminates the need for IT infrastructures to connect remote equipment for sensing

and control. The integrated Sure Cross

wireless radio enables Modbus connectivity to remote sensors, indicators, and

control equipment.

Wired Connectivity

Ethernet: Modbus TCP, Ethernet/IP, or Profinet
Field Bus: Modbus RS-485 Master/Slave

Wireless Connectivity

Sure Cross Wireless Radio: DX80 900 MHz, DX80

2.4 GHz, MultiHop 900 MHz, or MultiHop 2.4 GHz
Cellular modem: CDMA (Verizon) or GSM

Logic Controller

—Program the DXM's logic controller using action rules and/or ScriptBasic language, which can execute

concurrently. The control functions allow freedom when creating custom sensing and control sequences. The logic controller

supports the Modbus protocol standards for data management, ensuring seamless integration with existing automation

systems. File and LCD password protection is an option.

Register Mapping

Cyclical Read rules from wireless devices or local

wired Modbus devices that include optional scaling,

error conditions, and the ability to activate a read rule
Cyclical or Change of State Write rules to wireless

devices or local wired Modbus devices with scaling
Modbus/TCP Master Read or Write rules for external

devices on the network

Action Rules

Thresholds (IF/THEN/ELSE) with timers, minimum

on/off time, and logging options
Math/Logic Rules (arithmetic and bitwise operators)
Control Logic (logical operators and SR/T/D/JK flip

flops)
Trending (multiple averaging filters)
Tracking (counts, on/off times)
Email and SMS text notifications
Push data on conditions

Scheduler

Time/calendar-based events
Holiday skips
One-time events
Dynamic scheduler updating
Astronomical clock

Optional Text Programming Language

ScriptBasic to create variables, arrays, functions,

loops, IF/THEN/ELSE, logical and arithmetic

operators, API commands, register access, string

functions and operators, time commands

Data Logging

Cyclic data/event logging
Email log files

User Interface

—A simple user interface consists of an LCD screen and four LED indicators. Use the LCD to access system

status and setup, view user selectable events or data, and to bind and perform site surveys for Sure Cross radios. Configure

the user programmable LEDs to indicate the status of the DXM, processes, or equipment.

User programmable LCD

Binding Sure Cross radios
Conducting a Site Survey
Viewing sensor information
Viewing the system's status

User Defined LED indicators

Sure Cross

DXM150 and 1500-Bx Wireless Controllers

www.bannerengineering.com - Tel: + 1 888 373 6767

Summary of Contents for Sure Cross DXM150 Series











































































































Search results

Summary of Contents for Sure Cross DXM150 Series

Reviews:

Brands by name

Popular brands

Banner Sure Cross DXM150 Series, Instruction Manual

Search results

Summary of Contents for Sure Cross DXM150 Series

Reviews:

Brands by name

Popular brands