manualshive.com logo in svg

Banner Sure Cross DXM150 Series, Instruction Manual

Share
Download
Banner Sure Cross DXM150 Series Instruction Manual Download Page 54

8.3.3 Create a Holiday Event

Use the 

Scheduler

 > 

Holidays

 screen to create date and/or time ranges that interrupt weekly events.

Figure 40. Scheduler > Holidays screen

1. Click on 

Add Holiday

.

A new rule is created.

2. Enter a name your new holiday rule.
3. Select the start date and time for the new holiday.
4. Select the stop date and time for the new holiday.

8.4 Authentication Setup

The DXM has three different areas that can be configured to require a login and password authentication.

•

Webserver/ Cloud Services Authentication

•

Mail Server Authentication

•

DXM Configuration Authentication

The webserver and mail server authentication depends upon the service provider.

8.4.1 Set the Controller to use Authentication

The DXM can be configured to send login and password credentials for every HTTP packet sent to the webserver. This

provides another layer of security for the webserver data.
Configuration requires both the webserver and the DXM to be given the same credentials for the login and password. The

webserver authentication username and password are not stored in the XML configuration file and must be stored in the

DXM.

1. From within the DXM Configuration Software, go to the 

Settings

 > 

Cloud Services

 screen.

2. In the upper right, select 

Show advanced settings

.

3. Define the username and password in the 

Web Server Authentication

 section of the screen.

Figure 41. Web Server Authentication screen

The first time you select 

Require Authentication

, a pop-up box appears with additional instructions. Since the data

is not stored in the XML configuration file, it is hidden from view of the DXM Configuration Software.

4. Click on 

Send Authentication

.

The controller must be connected to the PC for this operation to succeed.
The data transmits directly to the DXM's non-volatile memory. If successful, a pop-up window appears, asking to
reboot the device.

5. Select 

Yes

 to reboot the device.

8.4.2 Set the Web Services to Use Authentication

1. At the Banner Cloud Data Services website, go to 

Settings

 > 

Sites

.

2. To edit the site settings, click 

Edit

 on the line of the site name.

Sure Cross

®

 DXM150 and 1500-Bx Wireless Controllers

 

 

54

www.bannerengineering.com - Tel: + 1 888 373 6767

 

Summary of Contents for Sure Cross DXM150 Series












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands