Banner Sure Cross DXM150 Series Instruction Manual Download Page 5

Page: 5 / 107

1 System Overview

1.1 System Overview for the DXM150-B1

Banner's DXM Logic Controller integrates Banner's wireless radio, cellular connectivity, and local I/O to provide a platform for

the Industrial Internet of Things (IIoT). Various combinations of I/O and connectivity are available based on the different

models.

Figure 1. DXM150-B1 system overview

Connectivity

Cellular

Sure Cross Radios

Ethernet

USB

RS-485 Master

RS-485 Slave

RS-232

User Interface

LCD Screen

LED Indicators

I/O

Universal Inputs

Discrete Outputs

Courtesy Power

Isolated Inputs

Relay Outputs

Logic Controller

Action Rules

Programming Language

Scheduler

Push to the Cloud

Data Logging

SMS and Email

SMS Control

Inputs/Outputs

—On-board universal and programmable I/O ports connect to local sensors, indicators, and control

equipment.

•

Universal Inputs

•

Discrete outputs

•

Courtesy power

•

Switch power

•

Isolated inputs

•

Relay outputs

•

Battery backup

•

Solar controller

Connectivity

—The DXM's wired and wireless connectivity options make it easy to share data between local and remote

equipment. The cellular modem option eliminates the need for IT infrastructures to connect remote equipment for sensing

and control. The integrated Sure Cross

wireless radio enables Modbus connectivity to remote sensors, indicators, and

control equipment.

Wired Connectivity

Ethernet: Modbus/TCP or Ethernet/IP

Field Bus: Modbus RS-485 Master/Slave

Wireless Connectivity

Sure Cross Wireless Radio: DX80 900 MHz, DX80 2.4 GHz,
MultiHop 900 MHz, or MultiHop 2.4 GHz

Cellular modem: CDMA (Verizon), GSM 3G, LTE (Verizon)

Logic Controller

—Program the DXM's logic controller using action rules and/or ScriptBasic language, which can execute

concurrently. The control functions allow freedom when creating custom sensing and control sequences. The logic controller

supports the Modbus protocol standards for data management, ensuring seamless integration with existing automation

systems.

Action Rules

Supports simple logic, arithmetic and thresholding

Use for low complexity solutions

SMS text message Notifications

E-mail Notifications

Push data on conditions

Text Programming Language

ScriptBasic

Use when Action Rules cannot supply a solution

Scheduler

Time/calendar-based events

Astronomical clock

Data Logging

Cyclic Data/Event logging

E-mail log files

SMS Commanding

Read/Write Local Registers

Upload data to the cloud-based data service

Reboot controller

User Interface

—A simple user interface consists of an LCD screen and four LED indicators. Use the LCD to access system

status and setup, view user selectable events or data, and to bind and perform site surveys for Sure Cross radios. Configure

the user programmable LEDs to indicate the status of the DXM, processes, or equipment.

Sure Cross

DXM150 and 1500-Bx Wireless Controllers

www.bannerengineering.com - Tel: + 1 888 373 6767

Summary of Contents for Sure Cross DXM150 Series











































































































Search results

Summary of Contents for Sure Cross DXM150 Series

Reviews:

Brands by name

Popular brands

Banner Sure Cross DXM150 Series, Instruction Manual

Search results

Summary of Contents for Sure Cross DXM150 Series

Reviews:

Brands by name

Popular brands