Banner Sure Cross DXM150 Series Instruction Manual Download Page 55

Page: 55 / 107

Figure 42. Settings > Sites screen of the Banner CDS website

At the bottom of the pop-up window is a checkbox to enable authentication/validation.

3. Enter the same username and password as used in the DXM Configuration Software. The username and password

do not need to be a defined user within the Banner Cloud Data Services website.

8.4.3 Mail Server Authentication

Complete the mail server settings to have the DXM send email alert messages or to email the log files.
The SMTP password is stored in the DXM, not the XML configuration file. Use the

Settings

Notifications

screen to

complete this configuration.

Figure 43. Mail server settings

After selecting

Enable SMTP Authentication

for the first time, a pop-up box appears with additional instructions to complete

the mail server authentication process.
After entering the user name and password, click on

Send SMTP Password

to save the user name and password to the

DXM. The DXM must be connected to the PC to complete this operation. If successful, a pop-up window appears, asking to

reboot the device. Select

Yes

to reboot the device.

8.4.4 Controller Configuration Authentication

The DXM can be programmed to allow changes to the configuration files only with proper authentication by setting up a

password on the

Settings

Administration

screen in the DXM Configuration Software.

With the DXM connected to the PC, click

Get Device Status

. The DXM status displays next to the button.

Sure Cross

DXM150 and 1500-Bx Wireless Controllers

www.bannerengineering.com - Tel: + 1 888 373 6767

Summary of Contents for Sure Cross DXM150 Series











































































































Search results

Summary of Contents for Sure Cross DXM150 Series

Reviews:

Brands by name

Popular brands

Banner Sure Cross DXM150 Series, Instruction Manual

Search results

Summary of Contents for Sure Cross DXM150 Series

Reviews:

Brands by name

Popular brands