7.6 System Info
Various DXM system settings are shown in this menu. The Push, Ethernet, and Cell parameters are helpful for debugging
network connections. This is a read only menu.
Figure 34. System Info menu
System Info
Controller
Push
ISM Radio
IO Board
Date:
Firmware:
Build:
Model:
Serial:
Method:
Interval: hh:mm
URL:
Page:
Https: on/off
Site ID:
Serial:
Model:
Date:
RF FW Pt:
RF FW Ver:
RF EE Pt:
RF EE Ver:
Serial:
Model:
Date:
RF FW Pt:
RF FW Ver:
RF EE Pt:
RF EE Ver:
to change the value
to accept
ENTER
BACK
to return to the previous menu
↑ ↓
Ethernet
DHCP:
IP:
Subnet:
Gate:
Mac:
DNS1:
DNS2:
Cell
Signal:
Phn#:
Dev#:
SIM:
CellVer:
CellMdl:
CellFw:
CellMask:
Wifi
IP:
Mode:
AP:
Stat:
Script
Path:
Baud:
Code:
LCD Board
Serial:
Model:
Date:
RF FW Pt:
RF FW Ver:
RF EE Pt:
RF EE Ver:
Cell
Shows the cellular MEID number (Mobil Equipment Identifier), MDN (Mobil Device Number), version, signal, firewall
setting, and firewall mask. Some of these parameters are not visible until the cellular network is accessed.
Controller
Displays the date, build, model, and serial number.
Ethernet
Displays the IP address, MAC address, DHCP, Gateway address, and DNS settings.
I/O Board
Displays the serial number, model, date, firmware part numbers, and version numbers.
Sure Cross
®
DXM150 and 1500-Bx Wireless Controllers
www.bannerengineering.com - Tel: + 1 888 373 6767
49
