Banner L-GAGE LE250 IO-Link, Instruction Manual

Page: 22 / 35

Navigate: MENU > INPUT > Type
Remote Input: Not available
Default: Disabled
Input Type Description
Teach The remote input is used to TEACH and program the sensor. (Default)
LasrEnbl The remote input is used to control when the laser emitter is On/Off.
SyncMstr The remote input is used as the Master Sync output to an attached Slave sensor (see Sync Master/
Slave on page 26).
SyncSlve The remote input is used as the Slave Sync input from an attached Master sensor (see Sync Master/
Slave on page 26).
Disabled The remote input is disabled.
3.7 Measure Menu (MEASURE)
Use this menu to view or change the:
• Speed
or
or
Go Back to Parent Menu
Select Menu Item
Press to Save Setting
Press and Hold to Go Back
to Run Mode Default Setting
MENU MEASURE
Speed Standard
Speed Fast
Speed Medium
Speed Slow
MEASURE Speed
Figure 20. Measure Menu Map
3.7.1 Speed
The Speed option sets the speed at which the measurement is calculated. This process uses averaging in the digital
processing of the signal to calculate the measurement. A slower speed increases the response time of the sensor but
improves the repeatability. See Figure 27 on page 30 for repeatability specifications for each speed.
Navigate: MENU > MEASURE > Speed
Remote Input: Not available
Default: Standard
Class 1 Laser Models Class 2 Laser Models
Speed Response Time Response Time in Sync
Mode
Response Time Response Time in Sync
Mode
Fast 2 ms 4 ms 2 ms 4 ms
Standard 10 ms (default) 20 ms 5 ms (default) 10 ms
Medium 30 ms 60 ms 15 ms 30 ms
Slow 100 ms 200 ms 50 ms 100 ms
L-GAGE
®
LE250/550 IO-Link Laser Gauging Sensors
22 www.bannerengineering.com - Tel: 763.544.3164