Banner L-GAGE LE250 IO-Link, Instruction Manual

Page: 15 / 35

3.5.2 Midpoint TEACH
Output OFF
0 mm
(500 mm) (700 mm)
(600 mm)
1000 mm
SP1 SP2
Midpoint
Output ON
Figure 17. Window and Midpoint Example
The Midpoint TEACH uses both the window size and the
TEACH midpoint to determine the actual measurement
window. For example, a window of 200 mm with a midpoint
of 600 mm places the measurement window from 500 mm to
700 mm.
To use Midpoint TEACH:
1. Set the window size.
2. Set the measurement window using
TEACH Midpoint
on page 16.
Window Size
The WndSize option sets the window size that the Midpoint TEACH uses to set the setpoint one and setpoint two
thresholds.
The Midpoint TEACH fails if the window is not taught within the valid measurement range.
LE250 Laser Sensor LE550 Laser Sensor
Window Size Minimum 1 mm 10 mm
Window Size Maximum 250 mm 800 mm
Range 100 mm to 400 mm 100 mm to 1000 mm
Default Window Size 50 mm 300 mm
Navigate: MENU > Dx_OUT > TchMid > WndSize
Remote Input: Available
1. Access the setup mode.
Method Action Result
Push Button
Navigate: MENU > Dx_OUT > TchMid > WndSize .
"WndSize" and the current window
size value display.
Remote Input
a. Double-pulse the remote input to enter
setup mode.
b. Three-pulse the remote input to enter
window size mode.
T T
T
T T
T
T
T
a. "REMOTE SETUP" displays.
b. "WndSize" and the current value
display.
2. Set the window size.
Method Action Result
Push Button
a. Use Down and Up to set the desired window size—the
value changes in increments of 2.
b. Press Enter to save the new value.
a. "WndSize" and the new value
display.
b. The new value flashes and returns
to "TchMid WndSize".
L-GAGE
®
LE250/550 IO-Link Laser Gauging Sensors
www.bannerengineering.com - Tel: 763.544.3164 15