Cable Connections for Remote Display
The cable connections on the iVu Plus with remote display are shown below, and power I/O connections (B) are defined in
the Power I/O Connections table below.
A
B
C
D
A
Remote Display Connector
B
Power I/O Connector
C
USB Connector
D
Ethernet Connector
NOTE: Micro video lens model shown, C-Mount model
connections are identical.
Power I/O Connections
Pin #
Wire Color
Description
Direction
1
White
Output 1
Output
2
Brown
10-30V dc
Input
3
Green
Output 2
Output
4
Yellow
Strobe Out (5V dc only)
Output
5
Gray
Remote Teach
Input
6
Pink
External Trigger
Input
7
Blue
Common (Signal Ground)
Input
8
Red
Ready
Output
9
Orange
Output 3
Output
10
Light Blue
RS-232 TX
Output
11
Black
RS-232 Signal Ground
Output
12
Violet
RS-232 Rx
Input
Demo Mode
The first time you power up the iVu Plus TG sensor, it starts in Demo Mode and allows you to choose whether to stay in
Demo Mode or exit to Live Mode. Demo Mode uses stored images and inspection parameters that demonstrate how the
sensor is set up without having to worry about focus, lighting, or triggers. In this mode, you can learn how to make
adjustments while working with the different sensor types and observing how the adjustments affect the sensor results.
When you exit Demo Mode, the sensor reboots into its normal operating mode with default settings.
iVu Plus TG Gen2 Series Sensor
P/N 178442 Rev. B
www.bannerengineering.com - Tel: +1-763-544-3164
3
