Sound settings
Loudspeaker setup – surround sound
Add BeoLab speakers and subwoofers to your television wired or wirelessly and you
can have a surround sound system which fits easily into your living room. You get the
best sound experience in the area bounded by the speakers.
When you connect additional speakers to your television, wired speakers are
automatically detected by the television. Wireless speakers must be scanned first for
the television to detect them. A message appears on the screen and you can follow on-
screen instructions to configure the speaker.
You can also create speaker groups to customise the speaker setup for listening
positions other than the one in front of the television, for example, at the dining table
or in an armchair.
Settings
Sound
...
Sound settings are preset from the factory to neutral values which suit most types of
programmes. However, if you wish, you can adjust these settings to your liking.
Adjust sound settings such as volume, bass and treble and, for wired speakers, enable
eco mode. You can also look up information about the chosen sound settings and reset
the sound settings to default values.
In the Sound menu you can also find the Speaker connections menu, where you can set
up both wired and wireless speakers.
For more about daily use of speaker groups, press the
red
button in the on-screen
help and find '
Daily use of sound modes and speaker groups
'.
Your content provider may have prohibited distribution of digital wireless sound to your
speakers. You must then use wired Power Link connected speakers instead.
For advanced information about sound settings, see the Technical Sound Guide on
www.bang-olufsen.com/guides
.
Sound modes
Set up sound modes
The television has several sound modes optimised for different types of programmes and
sources. The sound modes are designed by sound engineers to suit all situations.
However, if you wish, you can adjust the values in the sound modes to your liking in
the
Sound modes
menu. The sound modes have predefined names. For example,
use
Movie
when watching from a Blu-ray player or use
Game
to enhance the sound when
using a game console. The
Custom
sound mode can be set up if you wish to define a new
type of use and settings. It is the only mode you can rename. To rename the
Custom
mode, press the
yellow
button and follow on-screen instructions.
If you wish to reset a sound mode to default values, you must select
Reset <...> mode
in
the specific sound mode’s setup menu and confirm that you wish to reset the values.
You can bring up a list of sound modes on the TV screen by finding
Sound
in the
BeoRemote One
LIST
menu and pressing the
centre
button. From here, you can select a
desired sound mode.
For information about selecting a specific sound mode for a source, press the
red
button
in the on-screen help and find '
Sound mode
'.
40
Summary of Contents for BeoVision Avant-55
Page 1: ......
