Picture corrections
You can make brightness and contrast corrections as well as shift and zoom the picture
horizontally and vertically on the TV screen to avoid any unwanted areas being visible on
the screen. The options available depends on the source selected.
Auto selection
If available for the connected source, select if the source should be selected
automatically as soon as the television detects a signal, provided the television is on at
the time.
Audio level
Set the audio level of the connected source. This also enables you to align the audio level
of the different products connected to the television.
Blanking
If available for the connected source, select for how long the TV screen should display a
blank screen before it displays the signal of the connected product. If, for example, a
connected set-top box requires some time to start up, you can set the 'blanking' time to
ensure that the picture is ready before it is displayed on the television.
BeoRemote lists
Select if a source should be present in the list of video sources in your remote control
display when you press
TV
, in the list of music sources when you press
MUSIC
, in both
lists or in none of them.
Note that if you select
None
, the selected source will not be visible in the TV and Music
lists on your remote control.
Reset all settings for a source
If you have connected and configured a source to a specific socket on the television and
then disconnect the source permanently, you must reset the source settings. Highlight
the source in the
Source list
menu, press
and select
Reset to default
. When you select
Yes
, the source is no longer configured to this socket. Next time you connect a source to
the socket, you are asked to configure the source.
Under
Service
you can remove unused PUC tables. For more information, press the
red
button in the on-screen help and find '
Service and software update
'.
22
Summary of Contents for BeoVision Avant-55
Page 1: ......
