Distribute sound from video sources
Distribution of sound from video sources may not be available in the current software
version.
In the
Sound from video sources
menu, you set up whether or not your build-in or
connected video sources should be able to distribute sound to other sources connected
to your home network.
If your setup includes a wireless connection to the home network and your television and
a link product with speakers are placed close to each other so that you can hear the
sound from both products, you will experience echo problems, because the sound is
delayed a little on the way to the speakers of the link product. To avoid this, we
recommend that you set
Sound from video sources
to
off
. Alternatively, you can connect
both the television and all link products to the home network by means of an Ethernet
cable instead of having a wireless connection.
HDMI Matrix
The HDMI Matrix function may not be available in the current software version.
The HDMI Matrix itself is a physical product that can be connected allowing you to
connect up to 32 external sources to up to 32 televisions in different rooms and access
the sources either individually from each television or simultaneously from several rooms
via BeoRemote One.
The HDMI Matrix must be connected and set up by your Bang & Olufsen retailer.
You cannot connect more than one HDMI Matrix in a setup.
Settings in the HDMI MATRIX menu
In the
HDMI Matrix
menu, you can select settings for your HDMI Matrix.
Connect an HDMI Matrix …
1. In the Product Integration menu, highlight
HDMI Matrix
and press
.
2. Select an
HDMI IN
socket and press the
centre
button.
3. Follow on-screen instructions.
After selecting
Finish
, the HDMI Matrix is configured and the
Source list
is shown for you
to configure the sources connected to the HDMI Matrix. This is done the same way as
other connected products. For information about setting up connected products, press
the
red
button in the on-screen help and find '
Set up connected products
'.
If you at a later time disable a saved HDMI Matrix configuration by setting the
HDMI
Matrix
field to
No
, your settings for inputs are still saved. This means that if you enable
the HDMI Matrix again, the settings are remembered.
To unconfigure a source, press the
red
button in the on-screen help and find '
Reset all
settings for a source
'.
62
Summary of Contents for BeoVision Avant-55
Page 1: ......
