manualshive.com logo in svg

Bang & Olufsen BeoVision Avant-55, User Manual, Page: 5 / 96

Share
Download
Bang & Olufsen BeoVision Avant-55 User Manual Download Page 5

Remote control

How to use your remote control

In this guide, operation is described with BeoRemote One. Note that to operate your
television, it must first be paired with BeoRemote One. Your television enters pairing
mode as soon as you connect it to the mains. For information on how to enable pairing
of BeoRemote One, see the guide for your remote control, 

www.bang-

olufsen.com/guides/beoremoteonebt

. Also, press the red button in the on-screen help

and find '

Bluetooth

' for more about pairing.

Display
The display shows you a list of sources or functions when it is switched on.

TV

Display available television sources in the display for you to switch on. Use 

 or

 

 to

step in the list*.

MUSIC

Display available music sources in the display for you to switch on. Use 

 or

 

 to step

in the list*.

, 

, 

, 

 (

MyButtons

)

Long press to save the current setup, such as sound settings and stand positions, short
press to activate it.

0-9

Select channels and enter information in on-screen menus.

LIST

Display extra functions in the display. Use 

 or

 

 to step in the list.

GUIDE

Bring up the TV Programme Guide.

 (Back button)

Leave or move backwards through TV menus and the BeoRemote One lists.

INFO

Bring up information on a menu or function.

 (Home button)

Bring up the Home menu, from where you can access different apps, among other a
setup app, a TV app and MUSIC app.

5

Summary of Contents for BeoVision Avant-55

































































































Reviews:

No comments