Bang & Olufsen BeoVision Avant-55 User Manual Download

Page: 65 / 96

Download PUC tables – introduction

In the

Download more

menu, you can download PUC tables either online from the

Internet or from a connected USB device. The PUC tables enable you to operate non-
Bang & Olufsen products with the Bang & Olufsen remote control.

If you have more than one connected USB device, you must first select the desired USB
device.

You can search for peripheral units by entering the connected product's name or you can
browse for peripheral units by brand name.

If your connected equipment is not in the download list, there is currently no control
solution for it and you must select

Unsupported source

. You will not be able to operate

your equipment with your Bang & Olufsen remote control. You can inquire with your
Bang & Olufsen retailer about support of sources.

Browse for PUC tables

Browse for available peripheral units.

1. Highlight a brand name and press



2. Highlight one or more peripheral units from the list brought up and press the

centre

button to select them.

3. Select

Download

to download the selected PUC tables.

4. Repeat the procedure, if you wish to download PUC tables for other brands.

Search for PUC tables

Search for peripheral units.

1. Enter the connected product's name or brand name and press the

centre

button.

2. Highlight a peripheral unit from the list brought up and press the

centre

button

to select it. Repeat the procedure if you wish to download more PUC tables.

3. When you have selected the relevant units, press the

green

button to be able to

download them.

4. Select

Add more

if you wish to add more units or

Download

to start

downloading.

Transfer all PUC tables

If you download PUC tables from a USB device, you can also select

Transfer all

transfer all the PUC tables saved to the television provided that there is enough memory
available.

Manage existing PUC tables

Update PUC tables

Check if there are any updates available for your currently downloaded PUC tables.

1. In the

PUC management

menu, bring up

Manage existing

2. Press



and press the

green

button to check for updates.

3. In the list of available updates, use the arrow buttons to highlight the PUC tables

you wish to update and press the

centre

button. If a table you do not wish to

update is already selected, highlight it and press the

centre

button to deselect it.

4. To bring up information on the selected tables, highlight

View release notes

and

press the

centre

button. Press the

centre

button again to leave the release

Summary of Contents for BeoVision Avant-55

































































































Search results

Summary of Contents for BeoVision Avant-55

Reviews:

Related manuals for BeoVision Avant-55

Brands by name

Popular brands

Bang & Olufsen BeoVision Avant-55, User Manual

Search results

Summary of Contents for BeoVision Avant-55

Reviews:

Related manuals for BeoVision Avant-55

Brands by name

Popular brands