Fault flow chart 2.3
Network Connectivity
Product indicator
Network/Bluetooth indicator
Ethernet
First 5min
No change
White (Solid)
idle after 5min
No change
Transition to dim
Wi-Fi setup/connecting
Setup (WAC Open) In progress
No Change
Amber (Pulse, repeat)
Reconnect In progress
No Change
Amber (Flash, repeat)
Wi-Fi Connection status (X>25%)
In general (for 5min)
No change
White (Solid)
In general (idle after 5min)
No change
White (Transition to dim)
Wi-Fi Connection status (Signal strength: 25
≥ X ≥ 10 %)
In general (for 5min)
No change
Amber (Solid)
In general (idle after 5min)
No change
Amber (Transition to dim)
Wi-Fi Connection status (X<10%)
In general (for 5min)
No change
Amber (Solid)
In general (idle after 5min)
No change
Amber (Transition to dim)
Wi-Fi Not configured or Wi-Fi Error
In general (for 5min)
No change
Blue (Solid)
In general (idle after 5min)
No change
Blue (Transition to dim)
BT Connectivity
Product indicator
Network/Bluetooth indicator
Bluetooth parring
In progress (Only when product turn off
“Always Open”)
No change
Blue (Flash, repeat)
Successfully
No change
Blue (Transition, 5sec)
Fail (Apply for Cancel via webpage and
manually trigger timeout)
Red (Transition, 5sec)
BLE pairing
In progress (only when Pairing is manually
triggered)
No Change
Blue (Flash, repeat)
Successfully
No Change
Blue (Transition, 5sec)
Fail (Apply for Cancel via webpage and
manually trigger timeout)
Not required
Red (Transition, 5sec)
Audio source
Product indicator
Network/Bluetooth indicator
Bluetooth active source
For first 5min
No change
Blue – on
Pause BT source
No change
Blue
Change to other source)
No Change
Change from Blue to Network
status
Disconnect BT
No Change
Change from Blue to Network
status
Idle after 5min
No Change
Blue – dim
Non-BT active source
No Change
Blue (Transition, 5sec)
Disconnect BT
No change
No change
Switch to BT source
No change
Change from Network status to
Blue
Summary of Contents for Beoplay A9 3rd Generation
