![background image](http://html1.mh-extra.com/html/bang-and-olufsen/beoplay-a9-3rd-generation/beoplay-a9-3rd-generation_service-manual_3054023010.webp)
2.4 Fault flow chart
< >
< >
Other status
Product indicator
Network/Bluetooth indicator
Software Updating
Red (Pulse, repeat)
Red (Pulse, repeat)
Product/Critical FW Error
Red (Quick flash,
repeat)
Transition to off
Hardware Overheated
Amber (Pulse, repeat)
Not required
Factory Reset (reset afterward)
Red (Transition, 5sec)
Red (Transition, 5sec)
Short Press/ Single rotate/ Change track/ Slide
White (Quick flash,
once)
Not required
Continuous Rotate (Stop indication when
Max/Min volume reached*) (for Volume only)
White (Quick flash,
until release)
Not required
Long Press/ Very Long Press (a flash at the X
duration after pressed to indicate finger can
be released now)
Note: light feedback needs to align with
sound prompt.
White (Quick flash,
once)
Not required
Received command from IR or App command
White (Quick flash,
once)
Not required
Factory reset
Before trouble-shooting a faulty product, it may be useful to perform a factory
reset.
You can reset the Beosound A9 3
rd
gen. by using the Bang & Olufsen App. Open
the App, enter the ‘SETTINGS’ menu and select ‘RESET’, then confirm the reset
to factory settings.
The Beosound A9 3
rd
gen. can also be reset to factory settings by pressing and
hold the configuration button for 8 seconds. When the Product indicator and the
Network/Bluetooth indicator flash red once, the Beosound A9 3
rd
gen. will reset.
Check for newest software
Always ensure to have the newest software version installed. Software can be
updated via ServiceTool, The Internet or the Bang & Olufsen App. How to update
software, see page 3.3.
Summary of Contents for Beoplay A9 3rd Generation
