Replacement of modules 4.21
Connect Wireless Antenna wire
- Connect antenna wire by placing the
wire connector in correct position on top of the
PCB connector and press gently until it snaps in.
! When connecting antenna wires, be careful
not to damage the antenna plug or wire.
Correct position
- Gently release PCB82.2, Wireless - Bluetooth
Antenna from bracket, use peeler
! Attention cable
- When reassembling, mount tape on PCB82.2,
Wireless Antenna
Replace PCB82.2, Wireless - Bluetooth Antenna
+
4.2 BeoPlay A9 in service position
- Disconnect antenna wire with the special tool,
Extraction jig, U.Fl. Series. Pull gently
perpendicular to the PCB01 via the chain
! Attention: When disconnecting, be careful not
to damage the antenna plug or wire
From PCB82.2 Black
Summary of Contents for Beoplay A9 3rd Generation
