Accessories
128
Power Panel T30 User's manual V1.42 - Translation of the original documentation
8.2 TB6102 2-pin power supply connector
This 1-row 2-pin terminal block is used to connect the power supply.
8.2.1 Order data
Model number
Short description
Terminal blocks
0TB6102.2010-01
Accessory terminal block, 2-pin (3.81), screw clamp terminal block 1.5 mm²
0TB6102.2110-01
Accessory terminal block, 2-pin (3.81), cage clamp terminal block 1.5 mm²
Table 4: 0TB6102.2010-01, 0TB6102.2110-01 - Order data
8.2.2 Technical data
Information:
The following specifications, properties and limit values apply only to this accessory and may deviate
from those that apply to the complete system. The data specifications for the complete system take
precedence over those of individual components.
The technical data in this manual is current as of its creation/publication. We reserve the right to make
changes.
Model number
0TB6102.2010-01
0TB6102.2110-01
Terminal block
Number of pins
2 (female)
Type of terminal block
Screw clamp terminal block
Cage clamp terminal block
Cable type
Only copper wires (no aluminum wires!)
Spacing
3.81 mm
Connection cross section
AWG wire
28 to 16
Wire end sleeves with plastic covering
0.25 to 0.5 mm²
With wire end sleeves
0.25 to 1.5 mm²
Flexible
0.14 to 1.5 mm²
Inflexible
0.14 to 1.5 mm²
Tightening torque
0.22 to 0.25 Nm
-
Electrical characteristics
Nominal voltage
300 V
Nominal current
1)
8 A
Table 5: 0TB6102.2010-01, 0TB6102.2110-01 - Technical data
1)
The limit data for each Power Panel must be taken into consideration.
8.3 Data storage devices
For technical data and additional information about data storage devices, see the corresponding documentation.
This can be located and downloaded by searching for the data storage device's model number at
8.4 Cable accessories
For technical data and additional information about cables, see the corresponding documentation. This can be lo-
cated and downloaded by searching for the cable's model number on the B&R website at
.
