Configuration • Service pages
64
Power Panel T30 User's manual V1.42 - Translation of the original documentation
The sample images are displayed one after the other. A touch gesture shows the next sample image; and after
the last image, the service page is shown again.
Screen rotation
Default setting: 0°
Entry range: 0°, 90°, 180°, 270° (in 90° increments)
The angle of rotation of the display is set here. This setting affects how the screen content is output. After selection,
the display content is rotated clockwise according to the specified angle.
Settings for the boot animation
These settings are used to configure the position and time delay for the boot animation:
Boot animation left pos
Default setting
0
Entry range
0 to 2048
1)
Unit
Pixels
Function
Definition of the distance from an existing boot animation to the left edge of the display.
Boot animation top pos
Default setting
0
Entry range
0 to 2048
1)
Unit
Pixels
Function
Definition of the distance from an existing boot animation to the top edge of the display.
Boot animation delay
Default setting
0
Entry range
0 to 1000
Unit
ms (milliseconds)
Function
Delay in milliseconds between the individual images in the GIF animation. The individual values have
the following effect:
Value [ms] Description
0
In this case, the delay defined in the GIF file will be used.
If no delay is defined in the GIF file, 100 ms is used.
>0
Applies the delay time as configured.
It is possible that small values cannot be achieved because of performance limitation of the device.
In this case, the animation is slower than defined by the value.
Boot animation prerequisites/information
.
1)
Reasonable values range from 0 to the width/height of the screen. The screen width/height depends on the device being used and the configured
Screen rotation
.
