Configuration • Service pages
Power Panel T30 User's manual V1.42 - Translation of the original documentation
63
5.1.5 Service page
Screen
On this service page, some settings for the display can be changed. The following graphic shows the default
settings:
Startup
Network
Time
Screen
Audio
Hand button
VNC
Web
Storage
Update
Backup & Reset
Security
OPC UA
Display brightness
0 to 100%
50
Screensaver
Calibrate touch
Press to calibrate
Screen rotation
Specify the screen rotation angle
0°
Boot animation left pos
Animation offset from left side in pixel
0
Boot animation top pos
Animation offset from top in pixel
0
Boot animation delay
Delay of boot animation in ms
0
Display brightness
Default setting: 50
Entry range: 0 to 100
Unit: %
Here, the current brightness of the display and the basic setting for the display are configured after restarting the
device:
•
Each change to a value on the service page directly and immediately affects the brightness of the display.
•
The currently set value only becomes the default setting for the device once it is saved (see
).
Setting 0% on the service page corresponds to a residual brightness of 20%:
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0
10
20
30
40
50
60
70
80
90
100
Range from 0 to 50
Range from 50 to 100
Brightness range of the display
Setting range on the service page screen
Brightness can also be controlled by the application (see
"Adjusting display brightness" on page 92
).
Screensaver
Default setting: Disabled
The options for the selected screen saver is described in the following section
"Screensaver settings" on page
Calibrate touch
(Button)
Function: Start touch calibration (see
"Touch screen calibration" on page 52
).
Start demo
(Button)
Function: Show sample images