B&R MAPPC800-ENG, User Manual

Page: 208 / 396

208
Software • BIOS options
Panel PC 800 User's Manual V 1.00
Legacy devices
Case 3 Displays the fan speed of housing fan 3. None -
Case 4 Displays the fan speed of housing fan 4. None -
Figure 106: 945GME - Legacy Devices
BIOS setting Meaning Setting options Effect
COM A Settings for the COM1 serial interface in
the system.
Disabled Disables the interface.
Enabled Enables the interface.
Base I/O address Selection of the base I/O address for the
COM port. 238, 2E8, 2F8, 328, 338,
3E8, 3F8
Selected base I/O address is assigned.
Interrupt Selection of the interrupt for the COM port. IRQ 3, IRQ 4, IRQ 5,
IRQ 6, IRQ 7, IRQ 10,
IRQ 11, IRQ 12
Selected interrupt is assigned.
COM C Setting of the COM port for the touch
screen on the monitor/panel connector.
Disabled Disables the interface.
Enabled Enables the interface.
Base I/O address Selection of the base I/O address for the
COM port. 238, 2E8, 2F8, 328, 338,
3E8, 3F8
Selected base I/O address is assigned.
Table 113: 945GME - Legacy Devices - Setting options
BIOS setting Meaning Setting options Effect
Table 112: 945GME Baseboard Monitor setting options
Advanced
Legacy Devices Enable/Disable the
COM 1 port.
Base I/O address: [3F8]
Interrupt: [IRQ 4]
COM C: [Enabled]
Base I/O address: [3E8]
Interrupt: [IRQ 11]
COM D: [Disabled]
COM E: [Disabled]
Select Item
ETH2 LAN controller: [Enabled] Select Screen
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
COM A: [Enabled]
ETH2 MAC Address: 00:60:65:07:71:CF
BIOS SETUP UTILITY
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.