background image

22

General information • Safety notices

Panel PC 800 User's Manual V 1.00

2.6.3  Programs, viruses, and dangerous programs

The system is subject to potential danger each time data is exchanged or software is installed
from a data medium (e.g. diskette, CD-ROM, USB flash drive, etc.), a network connection, or the
Internet. The user is responsible for assessing these dangers, implementing preventative
measures such as virus protection programs, firewalls, etc. and obtaining software from reliable
sources.

2.7  Environmentally-friendly disposal

All B&R programmable controllers, operating and monitoring devices, and uninterruptible power
supplies are designed to inflict as little harm on the environment as possible.

2.7.1  Separation of materials

It is necessary to separate different materials so the device can undergo an environmentally-
friendly recycling process.

.

Disposal must comply with the respective legal regulations.

Component

Disposal

Programmable logic controllers
Operating and monitoring devices
Uninterruptible power supply
Cables

Electronics recycling

Cardboard box / paper packaging

Paper / cardboard recycling

Plastic packaging

Plastic recycling

Table 2: Environmentally-friendly separation of materials

Summary of Contents for MAPPC800-ENG













































































































































































































































































































































































































Reviews: