manualshive.com logo in svg

B&R MAPPC800-ENG, User Manual, Page: 178 / 396

Share
Download
B&R MAPPC800-ENG User Manual Download Page 178

178

Software • BIOS options

Panel PC 800 User's Manual V 1.00

PIRQ F (INTA)

Option for setting the PIRQ F.

Auto

Automatic assignment by the BIOS and operating 
system.

5,6,7,9,10,11,12

Manual assignment.

PIRQ G (INTB)

Option for setting the PIRQ G.

Auto

Automatic assignment by the BIOS and operating 
system.

5,6,7,9,10,11,12

Manual assignment.

PIRQ H 
(INTC,UHCI0,EHCI)

Option for setting the PIRQ H.

Auto

Automatic assignment by the BIOS and operating 
system.

5,6,7,9,10,11,12

Manual assignment.

1st Exclusive PCI

With this option you can determine if the
IRQ assigned to the PIRQ x is handled
exclusively (no IRQ sharing).

Information:

Is only displayed if a PIRQ is manually
set (e.g. 5).

None

No interrupt is assigned.

x

Assigns the PIRQ as 1st exclusive PCI IRQ.

2nd Exclusive PCI

With this option you can determine if the 
IRQ assigned to the PIRQ x is handled 
exclusively (no IRQ sharing).

Information:

Only displayed when two PIRQs are set
manually.

None

No interrupt is assigned.

x

Assigns the PIRQ as 2nd exclusive PCI IRQ.

3rd Exclusive PCI

With this option you can determine if the 
IRQ assigned to the PIRQ x is handled 
exclusively (no IRQ sharing).

Information:

Only displayed when three PIRQs are
set manually.

None

No interrupt is assigned.

x

Assigns the PIRQ as 3rd exclusive PCI IRQ.

BIOS setting

Meaning

Setting options

Effect

Table 94: 945GME - Advanced PCI Interrupt Routing - Setting options (cont.)

Summary of Contents for MAPPC800-ENG













































































































































































































































































































































































































Reviews:

No comments