B&R MAPPC800-ENG, User Manual

Page: 196 / 396

196
Software • BIOS options
Panel PC 800 User's Manual V 1.00
BIOS setting Meaning Setting options Effect
Type The type of drive connected to the primary
master is configured here. Not installed No drive installed.
Auto Automatic recognition of the drive and setup of
appropriate values.
CD/DVD CD -/ DVD drive.
ARMD ARMD - drive (zip drive)
LBA/Large Mode This option activates the logical block
addressing / large mode for IDE. Disabled
Disables this function.
Auto
Automatic enabling of this function when
supported by the system.
Block (Multi-Sector
Transfer) This option enables the block mode for
IDE hard drives. When this option is
enabled, the number of blocks per request
from the configuration sector of the hard
drive is read. Disabled Disables this function.
Auto Automatic enabling of this function when
supported by the system.
PIO Mode The PIO mode determines the data rate of
the hard drive.
Information:
This option is not available on the
PPC800. Therefore this setting is not
relevant.
Auto Automatic configuration of PIO mode.
0, 1, 2, 3, 4
Manual configuration of PIO mode.
DMA Mode The data transfer rate to and from the
primary master drive is defined here.
The DMA mode must be activated in the
Windows device manager in order to
guarantee maximum performance. Only
possible when manually setting up the
drive. Auto Automatic definition of the transfer rate.
Disabled Manual definition of the transfer rate.
S.M.A.R.T. Monitoring function of modern hard drives
(self-monitoring, analysis and reporting
technology). Auto Automatic detection and enabling.
Disabled Disables this function.
Enabled Enables this function.
32 Bit Data Transfer This function enables 32-bit data transfer. Disabled Disables this function.
Enabled Enables this function.
Table 104: 945GME - Secondary IDE Master - Setting options