45
Copyright 3/20
Bandit
MODEL 1425
MAINTENANCE
PRE WO#: 200562
START WO#: 200562
TENSIONER
BODY
TENSIONER
JAM NUT
There are two emergency shut down switches,
one located on each side of the infeed. To shut the
machine down, you can either push down on the
emergency shut down switch or you can push or pull
the actuation cable that runs along each side of the
infeed. Before restarting the machine, the emergency
shut down switch must be reset by pressing the blue
reset button on the side (see Figures 1 & 3).
To adjust the actuation cable, loosen the tensioner
jam nut and then turn the tensioner body to tighten
up the actuation cable (see Figure 2). While adjusting
the actuation cable, look at the cable tension gauge.
Keep looking at the cable tension gauge until it is
centered as shown.
EMERGENCY SHUT DOWN SWITCH
Figure 1
Figure 2
Figure 3
RESET
BUTTON
EMERGENCY SHUT
DOWN SWITCH
ACTUATION
CABLE
ACTUATION CABLE
TENSION GAUGE
ACTUATION
CABLE
RESET
BUTTON
EMERGENCY
SHUT DOWN SWITCH
ACTUATION CABLE
TENSION GAUGE
