17
Copyright 3/20
Bandit
MODEL 1425
CONTROLS
CONTROLS
1. Yoke Up / Down:
The yoke lift control operates the top yoke lift cylinder. To lower the yoke to apply down
pressure: press the button labelled “Yoke Down” on the remote or keypad, or pull the handle labelled
“Yoke Up/Down” towards you on the hydraulic valve. To lift the yoke for maintenance: press the button
labelled “Yoke Up” on the remote or keypad, or push the handle labelled “Yoke Up/Down” away from
you on the hydraulic valve. Otherwise, in the off position, the top yoke will float as needed over incoming
material.
DANGER
!
The yoke must be raised using the hydraulic valve when placing the yoke locks. Always use the yoke
cylinder lock and yoke lock pin when working under the yoke.
2. Feedwheel Forward / Reverse:
The feedwheel forward/reverse controls the top feedwheel only. To feed
material into the machine press the button labelled “Feedwheel Forward” on the remote or keypad, or pull
the handle labelled “Feedwheel Reverse/Forward” towards you. To reverse material out of the machine
press the button labelled “Feedwheel Reverse” or push the handle labelled “Feedwheel Reverse/Forward”
away from you on the hydraulic valve (Note: Must also use the reverse function on the “Infeed Conveyor
Forward/Reverse” on the hydraulic valve or use the “All Feed Reverse” button on the remote or keypad).
3.
Rapid Advance On / Off:
To speed up the discharge press the button labelled “Rapid Advance On”
on the remote or keypad, or in the mode screen of the control panel. To return the discharge to normal
speed press the button labelled “Rapid Advance Off” on the remote or keypad, or in the mode screen
of the control panel.
4.
Feed Speed Fast / Slow (Only Use When Rapid Advance is “Off”):
To increase the speed material is
fed through the machine press the button labelled “Feed Speed Fast” on the remote or keypad, or in the
mode screen of the control panel. To decrease the speed material is fed through the machine press the
button labelled “Feed Speed Slow” on the remote or keypad, or in the mode screen of the control panel,.
5. Throttle Up / Down:
To increase the engine throttle, press the button labelled “Throttle Up” on the remote
or keypad, or push the toggle switch up in the control panel. To decrease the engine throttle press the
button labelled “Throttle Down” on the remote or keypad, or pull the toggle switch down in the control panel.
6. Function Shift (Remote & Keypad Only):
The function shift button on the remote and keypad allows
the use of the secondary functions. The keypad will change colors and match the text on the decal.
7.
Discharge On / Off:
To turn the discharge on in the forward direction press the button labelled “Discharge
On/Off 2 Sec Hold” for two seconds on the remote or the keypad, in the mode screen of the control
panel, or push the handle labelled “Discharge Forward/Reverse” away from you on the hydraulic valve.
To stop the discharge press the button labelled “Discharge On/Off 2 Sec Hold” for two seconds on the
remote or the keypad, in the mode screen of the control panel, or pull the handle labelled “Discharge
Forward/Reverse” towards you.
8. Infeed Conveyor Forward / Reverse:
The infeed conveyor forward/reverse controls the infeed conveyor
only. To feed material into the machine press the button labelled “Feed Chain Forward” on the remote
or keypad, or pull the handle labelled “Infeed Reverse/Forward” towards you on the hydraulic valve. To
reverse material out of the machine press the button labelled “Feed Chain Reverse” on the remote or
keypad, or push the handle labelled “Infeed Reverse/Forward” away from you on the hydraulic valve
(Note: Must also use the reverse function on the “Infeed Conveyor Forward/Reverse” on the hydraulic
valve or use the “All Feed Reverse” button on the remote or keypad).
9. All Feed Reverse:
The all feed reverse function reverses material out of the machine controlling both
the feedwheel and the infeed conveyor. To reverse material out of the machine press the button labelled
“All Feed Reverse” on the remote or keypad. Hold the button as long as needed to reverse the material
out. Once the button is released the feedwheel and infeed conveyor stop.
10.
Keypad On / Off:
To use the keypad press the button labelled “Keypad On/Off”. Note: To use the functions
on the keypad; the control panel must be set to “Manual”
