![background image](http://html1.mh-extra.com/html/bandelin/dt-31/dt-31_operating-manual_3758423028.webp)
5/
Operation
28/52
1686-000 GB/2021-03
• Remove air bubbles from cavities. Rotate the objects accord-
ingly. Remove air bubbles under inset beakers. The ultrasound
only works where the fluid is in contact with the goods to be
treated or the inset beaker.
• Position the side with greater soiling so it is facing downwards.
Insert objects with joints (e.g. scissors or tongs) in open condi-
tion so that the whole surface is optimally reached by the soni-
cation fluid.
5.10 Removing goods to be treated
WARNING
Risk of burns
The sonication fluid, goods to be treated, the surface of the ultra-
sonic bath as well as accessories can be very hot.
– Do not touch the surface of the ultrasonic bath or accessories
like the lid. Do not reach into the sonication fluid.
– Allow the goods to be treated to cool down before you touch
them.
Switch the ultrasound off before you remove the goods to be
treated.
Do not remove the goods to be treated with your hands. For exam-
ple, carefully lift out the insert basket with the goods to be treated
and place it on a flat surface.
Rinse goods to be treated with clear water.
Do not leave the goods to be treated in the sonication fluid for too
long. This can damage the goods.