1686-000 GB/2021-03
23/52
Operation
/5
NOTICE
If you use an agent in powder form, do not pour it directly into the
ultrasonic oscillating tank.
– Mix agents in powder form in another container before you pour
them into the ultrasonic oscillating tank.
– Only pour the agent into the ultrasonic oscillating tank once it
has dissolved completely.
Fig. 4
Filling oscillating tank
1 On/off button for switching the ultrasonic bath on and off
2 Filling level mark
3 Drain with ball valve (depending on model)
Requirements
• The ball valve must be closed in ultrasonic baths with a drain.
• The ultrasonic bath must be switched off.
Procedure
1. Fill the ultrasonic oscillating tank with water up to
1
⁄
3
.
2. Pour the correct quantity of agent into the ultrasonic oscillating
tank. See chapter
9 Dosing table
.
3. Fill the tank with water up to the filling level mark while avoiding
foam formation. When using indirect sonication, take the dis-
placement caused by inset vessels into consideration.
Result
» The ultrasonic bath is ready to switch on.
2
3
1
