![background image](http://html1.mh-extra.com/html/bandelin/dt-31/dt-31_operating-manual_3758423032.webp)
6/
Maintenance
32/52
1686-000 GB/2021-03
6 Maintenance
6.1 Cleaning and care of the ultrasonic bath
Cleaning the housing
• Damp wipe the housing. Wipe it dry with a soft cloth.
• Do not use any abrasive cleaning products, only care products
without scouring additives.
• If necessary, disinfect the housing with a suitable surface disin-
fectant.
Care of the ultrasonic oscillating tank
Impurities in the ultrasonic oscillating tank accelerate its wear, can
lead to corrosion and reduce the ultrasonic effect. Therefore,
observe the following instructions:
• Rinse the ultrasonic oscillating tank thoroughly with water after
each use. Wipe it dry with a soft cloth.
• You can remove marks and residues with a stainless steel clean-
ing product without scouring additives.
• Do not use steel wool or scrapers to clean the ultrasonic oscil-
lating tank.
• Metal parts and rust particles in the ultrasonic oscillating tank
cause corrosion. Therefore, do not leave any metal parts in the
ultrasonic oscillating tank. If rust marks are visible, remove them
immediately with a soft cloth and a stainless steel cleaning
product without scouring additive.