TECHNICAL DATA (continuation)
Oil Probe (NivOil OP)
For connection to the sensor power supply unit (NivOil CU)!
Sensor material
PE-EL with stainless steel sensor
Cable
Standard with 10m oil/petrol resistant cable 2x1mm²
Other cable lengths on request
Maximum permissible cable length: 300m
[C ≤ 200 nF/km and L ≤ 1mH/km]
Cable colour
blue
Dimensions
approx. Ø32x250mm incl. cable support sleeve with 5cm marks for height adjustment
Protection
IP68
Measuring principle
capacitive, high frequency
Ambient temperature
-20°C...+60°C
EU Type Examination Certificate BVS 07 ATEX E 091 X
Ex-maximum values
Maximum input voltage Ui
17.9V DC
Maximum input current Ii
157mA
Maximum input power Pi
695mW
Maximum internal capacity Ci
60nF
(no mixed parameters)
Maximum internal inductance Li
0.3mH
(no mixed parameters)
Ex marking
㐀 II 1G Ex ia IIB T4 Ga
(intrinsically safe electrical equipment)
Interconnection
Sensor supply unit (NivOil CU) with oil probe (NivOil OP)
Special conditions for safe use
The oil probe connection cable must be routed through the separation between areas with category 1G requirements and less hazardous
areas in such a way that protection class IP67 in accordance with EN 60529 is guaranteed.
The oil probe (NivOil OP) and the connecting cable may only be used in areas where electrostatic discharges cannot occur.
The technical information on the use of the oil probe (NivOil OP) in connection with aggressive/corrosive media must be observed.
LEV
21-03-2023
M-531.01-EN-AI
OIL/LIGHT LIQUID
SEPARATOR MONITORING
NivOil - (translation)
22, Rue de la Voie des Bans · Z.I. de la gare · 95100 ARGENTEUIL
Tel
Fax
+33 (0)1 30 25 83 20
+33 (0)1 34 10 16 05
Web
www.bamo.eu
INTERNATIONAL
531-01
/17
