BAMO IER NivOil, Operating Instructions Manual

Page: 18 / 40

TECHNICAL DATA (continuation)
High Level Probe (NivOil HP)
Exclusively for connection to the sensor supply unit (NivOil CU)!
Material sensor PE-EL with PTC stainless steel sensor
Cable standard with 10m oil/petrol resistant cable 2x1mm²
Other cable lengths on request
Maximum permissible cable length: 300m
[C ≤ 200nF/km and L ≤ 1mH/km]
Cable colour blue
Dimensions ca. Ø32 x 200mm
Protection IP68
Measuring principle PTC sensor, heated
Ambient temperature -20°C...+60°C
EU Type Examination Certificate BVS 07 ATEX E 092 X
Ex-maximum values
Maximum input voltage Ui 17.9V DC
Maximum input current Ii 157mA
Maximum input power Pi 695mW
Maximum internal capacity Ci 60nF
(no mixed parameters)
Maximum internal inductance Li 0.3mH
(no mixed parameters)
Ex marking 㐀 II 1G Ex ia IIB T3
(intrinsically safe electrical equipment)
Interconnection Sensor supply unit (NivOil CU) with overfill probe (NivOil HP)
Special conditions for safe use
The connection line of the high level probe (NivOil HP) must be routed through the separation between areas with category 1G requirements
and less hazardous areas in such a way that protection class IP67 in accordance with EN 60529 is guaranteed.
The high level probe (NivOil HP) and the connecting cable may only be used in areas where there is no risk of electrostatic discharging.
Observe the technical information on the use of the high level probe (NivOil HP) in connection with aggressive/corrosive media.
LEV
21-03-2023 M-531.01-EN-AI
OIL/LIGHT LIQUID
SEPARATOR MONITORING
NivOil - (translation)
22, Rue de la Voie des Bans · Z.I. de la gare · 95100 ARGENTEUIL
Tel
Fax
+33 (0)1 30 25 83 20
+33 (0)1 34 10 16 05
Web
E-mail
www.bamo.eu
export@bamo.fr
INTERNATIONAL
531-01
/18