Smartgauge™ is warranted to be free of workmanship defects for a period of 2 years. In the event of a warranty claim,
please contact Balmar Customer Service at +1-360-435-6100 for a return authorization.
Exclusions to this warranty include:
1. Opening the case.
2. Any form of external damage to the case such as drilled holes (excluding the 4 pre-drilled mounting holes) etc.
3. Use of the equipment in any manner not described in this owner’s manual.
4. Attempted modifications.
5. Excess voltage or current as a result of incorrect installation.
6. Exceeding the rating of the alarm outputs.
7. Attempting to plug any non-approved equipment into the Smart interface state of chargeket or using the incorrect
type of communications lead.
8. Incorrect installation.
Visit
www.balmar.net
for more information regarding Balmar warranty policies and procedures.
PAGE 19
SECTION 12.0 – SMARTGAUGE FLOW CHARTS
12.1 – Display Mode
First Time Power Up/Following Factory Reset
r 1.03
SC
SC 12
bt 1
bt 6
12.65
b 1.05
Software
Revision
Checking
System
Voltage
System
Voltage
Selected
Battery
Type
Selections
Normal
Display
Selections
Battery Model
Revision
STATUS BUTTO N
VOLTS BUTTO N
r 1.03
12.65
E 01
XX.XX
b 1.05
Software
Revision
Alternatin g
Error/Voltage
Normal Display
Voltage
Normal Display
Charge Status
Time Since
Re-Power
Hours/Minutes
Battery Model
Revision
STATUS BUTTO N
VOLTS BUTTO N
12.65
C 75
12.2 – Display Mode
Power Up Following Power Failure
© Copyright 2016 Balmar LLC, Marysville, WA 98271 USA -
Reproduction of this manual or any of its parts is
strictly forbidden without express written permission. For more information about this and other Balmar DC charging products,
bisit, www.balmar.net
SECTION 11.0 – WARRANTY
