Balluff BVS ID-M1280-F1 Series, User Manual

Page: 62 / 88

BVS ID-M1280xF1-xx-xxx
16 english
4.3.6 IIoT (Gigabit Ethernet)
The LAN interface meets the Ethernet standard in accordance with IEEE 802.3-2008 (up to 1 Gigabit). This
network connection is used to call up the web interface BVS Cockpit for the configuration. In addition, a
communication channel is available to control the image analysis and to call up the generated result values.
8-pin M12 socket, X-coded
Pin Description Function
1 BI_DA + Bidirectional data, Pair A +
2 BI_DA – Bidirectional data, Pair A –
3 BI_DB + Bidirectional data, Pair B +
4 BI_DB – Bidirectional data, Pair B +
5 BI_DD + Bidirectional data, Pair D +
6 BI_DD – Bidirectional data, Pair D –
7 BI_DC – Bidirectional data, Pair C –
8 BI_DC + Bidirectional data, Pair C +
4.3.7 I/O light
The I/O light interface provides 24 Volt and two I/O signals (I/O 2 & I/O 3). These I/Os, similar to the two I/Os at
the power plug connectors (see chapter
Power ), are equipped with a push-pull output stage and a PNP input.
5-pin M12 socket, A-coded
Pin Description Function
1 VP (+24 V
DC
) Operating voltage
2 I/O Digital output
3 GND Ground
4 I/O External light output / digital
output
5 Not used None. Pin may not be used.
NOTE
The cable must correspond at least to category 5e in accordance with EIA/TIA-568.
Transfer in accordance with 1000BASE-T/100BASE-TX/10BASE-T is being supported.
