Balluff BTL7-A5-M Series, User Manual

Page: 39 / 146

www.balluff.com 13 english
6
Calibration procedure (continued)
6.3 Calibration procedure overview
6.3.1 Teach-in
The factory-set null point and end point are replaced by a
new null point and end point. The null point and end point
can be set separately, the output gradient changes.
The detailed procedure for teach-in is described
on page 15.
Steps:
►
Move float to the new null position.
►
Read new null point by activating the programming
inputs.
⇒
The current end point remains the same.
New null point
Before
After
Fig. 6-2: Reading new null point
►
Move float to the new end position.
►
Read new end point by activating the programming
inputs.
⇒ The current null point remains the same.
New end point
Before
After
Fig. 6-3: Reading new end point
Only with BTL7-C/E...:
►
The gradient of the current output can be inverted by
activating the programming inputs.
⇒ For example, a rising output gradient is changed to
a falling gradient. The voltage outputs are not
inverted.
BTL7-A/C/E5 _ _ -M _ _ _ _ -SF-F _ _
Magnetostrictive Linear Position Sensor – Rod Style